Motor Bike Campers





This price is for tent only.



The “Scout” is another first for our team at Flying Fish Campers. For sometime now we had realised that the camper trailer market is based on very large tents fitted to heavy trailers and consequently restricted families with small to medium sized vehicles from owning a camper trailer. We also noticed that camper tents for motor cycles were very small and off course only designed for a maximum of two people, and if you owned a motor cycle camper and you were able tow it behind your vehicle you still couldn’t accommodate the rest of your family or a couple of friends. We decided the market was crying out for a family sized tent that would be light and compact enough to fit on a small trailer and be towed behind either a car or motor cycle, and so we embarked on designing and manufacturing such a tent.

First we created a strengthened folding bed base and mattress that would extend into the main bedroom area. Next we reduced the size of the main bedroom area, and manufactured a large annex roof in both height and length that could be fully enclosed as a sleeping area for an additional three adults. All this must then fit onto a small bed board. Then we wanted to create airflow as smaller tents can be hotter inside than the larger tents, so we added a rear door, aligned all three doors (inc door in annex walls) to a “U” shape making them much wider than the conventional “D” shaped doors this then allows hot air to pass through the tent. Similarly each window had to have a corresponding window to allow perfect air flow and keep the tent cool in summer. Finally we adopted all the strengthening and sewing methods used in our Adventurer tents. Two prototypes a green and a camouflage tent were both manufactured at the same time. The two prototypes then embarked on a ninety night, twenty thousand kilometre adventure around Australia being tested in all the various conditions. The testing proved an overwhelming success and production commenced.




The following photos were taken before, during, and after Kevin, Keith and their wives put the “Scouts” to the test….




 The "SCOUT" can be fitted to a lightweight tralier for towing behind a motor cycle or small car




  Available in either Camouflage or Green canvas 




 Heavy Duty zip off travel cover



Dust cover underneath  



Tent without annex roof, very quick set up



Front and rear "U" shaped doors


 All window covers have eyelets to turn into awnings 


Tent with annex roof zipped on   


Windows are north- south / east- west configuration for maximum air flow


Tent with one wall (as privacy screen or wind break)



Annex with two walls and floor in place. Walls have zips in the corners and are velcroed to the roof


Austrack "SCOUT" Camper Trailer Tent Specifications & Benefits

Canvas: 13 oz (370g/sqm) Rip stop Canvas. Roof and Walls, Close weave weather resistant fully waterproofed with wax coating applied to underneath of the canvas.
Size: 13ft x 9ft 4in, 3.98m X 2.85m 11.34sq meters of space.
Colour: Dark Green walls with beige roof.
Double Stitched throughout with additional Canvas sewn into stress joints.
Floor: Washable, durable, sewn in PVC floor (500q/sqm) rising 15cms up the inside of walls.
Windows: All windows very fine strengthened M3 Midge mesh/Micro mesh, (not mosquito mesh).
Doors: All doors are zipped canvas, (two zips per door), with a zipped Midge mesh/Micro mesh door behind them.
Window Covers (External) can be rolled up and held in place with Toggles, and placed under sewn in valance.  All window coverings have eyelets.
Window Covers (Internal) all covers can be zipped up, or rolled down and toggled back.  .
Annex floor (removable) very strong PVC with Velcro sewn in to attach to annex walls and tent.
Annex walls (canvas) are 3 piece (zipped), including windows and both midge mesh and canvas entrance doors. The walls attach to annex roof/fascia and floor with very strong Velcro.
Bed Base board is 18mm 12 layered marine ply board, reinforced with 25mm steel frame. The bed board folds in half and has adjustable legs when extended for sleeping.
Double size bed mattress.
Rear tailgate cover
Heavy Duty 25mm hot galvanised tent poles (exterior).
Heavy Duty 25mm hot galvanised spring loaded pivot poles, lock tight adjustable (internal).
Heavy Duty 25mm Spreader Bars.
Guy Ropes, Guy Ropes with Springs, Pegs and rain caps.
Full dust cover provided.
Exterior travel cover 500g/sqm very heavy duty PVC, including zips and Velcro.

Total Weight is 84kg

















Copyright & Limitation on Use

No use should be made of materials on this Site, except as expressly authorized. All Site Content with the exception of external links, including the arrangement and design of the Content is owned Flying Fish Campers and Trailers and is protected by copyright and other intellectual property laws. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute in any way any Content, in whole or in part. You may download Content from the Site for your own personal, non-commercial use only, provided the Content is not modified in any way when you display or otherwise use the Content.